32-inch / 4K / high image quality liquid crystal "MSI Summit MS321UP" - AKIBA PC Hotline!

32-inch/4K/IPS panel display for businesses and creators VESA100 compatible and can be mounted on a monitor arm

Summit MS321UP is a 32-inch display equipped with a 4K resolution IPS liquid crystal panel type display. The main body size is 727.1 x 235 x 460.78 mm (width x depth x height) with the screen position lowered, and the weight is about 9.7 kg. The power supply is built into the display itself.

The front of the main body of Summit MS321UP. back. The Navi key for operating the OSD menu is located in the lower left corner.

On the back of the main unit, there is a Navi key for operating the OSD menu, and on the bottom of the back is a video input terminal with HDMI 2.0b (2 units), DisplayPort 1.2, DP Alt Mode compatible USB Type- equipped with C. In addition, as an interface other than video input, it has a USB upstream port (USB 3.2 Gen 1 Type B) for PC connection, USB 3.2 Gen 1 Type A for USB device connection, and a combo audio jack for PC connection. .

On the left side of the main unit, an SDXC compatible card slot, USB 3.2 Gen 1 Type A (2 units) for connecting USB devices, a microphone jack and a headphone jack are installed.

　The power switch is located on the bottom right side of the main unit, and on the opposite side, on the bottom left side, there is a macro key that can be assigned a function by the utility.

Input/output terminals located at the bottom of the back. The video input terminals are HDMI 2.0b (2 units), DisplayPort 1.2, USB Type-C (1 unit) compatible with DP Alt Mode. In addition, it has a USB upstream port (USB 3.2 Gen 1 Type B), USB 3.2 Gen 1 Type A, and a combo audio jack. Interface on the left side of the main unit. SDXC compatible card slot, USB 3.2 Gen 1 Type A (2 units), microphone jack, headphone jack. The power switch is located on the bottom right side of the main unit. On the bottom left side opposite the power switch, there is a macro key that can be assigned a function.

At the center of the back of the main unit, there is a screw hole for attaching the included stand. The position of this screw hole conforms to VESA100, and by attaching the included spacer, a VESA100 compatible monitor arm can be attached.

Center back of body. The screw holes for attaching the included stand are provided in positions that comply with VESA100. A monitor arm compatible with VESA100 can be used by using the included spacer.

The included display stand has a vertical angle adjustment (tilt) of -5 to +20 degrees, a horizontal swivel function of ±35 degrees (swivel), a height adjustment function of 0 to 100 mm, and cable management. It also has a code sleeve for.

Although it is a large display, the point is that the stand has a fairly wide range of motion and is easy to adjust.

Attached display stand. It is used by screwing it to the back of the main unit. The display stand has a cord sleeve for cable management. The tilt function allows you to adjust the angle of the display surface from 5 degrees downward to 20 degrees upward. With the swivel function, the display surface can be tilted up to 35 degrees left and right. With the height adjustment function, the height of the display surface can be changed within the range of 0 to 100mm.