Switch multiple PCs and use them!Tips that makes the work environment of telework convenient

At the beginning

The introduction of telework is recommended, and many people may have prepared the environment around the computer at home.In the past year and a half, I have been a little troubled in my computer around my computer.A computer was lent from the company for telework, but there was a personal computer for private use at home, and it was quite complicated to share peripheral devices.

So, this time, based on my own experience, I would like to introduce functions and equipment that can be conveniently used with one peripheral device on both personal computers in conducting telework. think.

What is the situation where you can switch multiple PCs in telework?

In the first place, what kind of situation would you use multiple PCs?What is the case that uses multiple PCs?It is often conceivable that there are two private personal computers and company rental computers in telework.The purpose of lending is to separate your personal computers and work personal computers from the security perspective to prevent data and information leakage.For example, in the case of the author, it is as follows.

　・ Private personal computer for home -desktop ・ PCs rented from their own company -PCs rented for laptops -Laptop There may be some problems in such a state.

Also, in Telework, if you use a headset for a web conference such as ZOOM, or if the loaned device is a laptop, many people will have a mouse keyboard, etc. separately.In this situation, you need as many personal computers used by peripherals such as mouse keyboards.If you use multiple mouse keyboards, you will get a place on the desk and get in the way of actual work, or the wiring code will increase and look bad.Therefore, even if the mouse keyboard is combined in one, it is quite troublesome to re -connect the device when switching between multiple PCs.

What are the peripheral devices often used in telework?

Once again, what is a peripheral device?Peripheral devices are devices used in combination with computers such as keyboards and mice.There are a variety of peripheral devices, as in the example, there are keyboards that input characters, speakers that output sounds, and external storage that input data.

To use a peripheral device, you need to connect a personal computer and a peripheral device.When using the peripheral device used on another computer, it is necessary to remove the connector and remove the peripheral device with a wired cable.There are the following methods of connecting the main peripheral devices that I often use in telework.

This time, there are many types of connections to be connected, so I would like to introduce convenient functions and equipment for changing the connection between personal computers by dividing them between wireless and wired connections.

Wired connection case

First, I will introduce how to connect by wired.Wired is a wired connection that devices are connected by cables.There are various standards such as USB and HDMI, and the cutouts differ depending on each type.

Connections between multiple personal computers, smartphones and wired peripherals can be switched by connecting the cable.If you often switch connections, you may be a little troublesome or get tangled.

So there is a switching machine to make it easier to switch.The switching machine can switch the connection with multiple PCs with a single switch, and uses multiple personal computers to the switching machine.By using this, you can switch the connection without removing and removing the cable.

Here's how to switch connections with a switching machine.This time, I will introduce it assuming to switch the monitor used on two personal computers.

The switch can be connected to the PC and the monitor as shown in the photo below.In the photo product, the LED can be turned on to determine which computer is connected.

Introducing the flow of switching.

1.At first, the monitor and PC 1 are connected, and the screen of PC 1 is displayed on the monitor.

2.By pressing the switch, the connection between the monitor and the PC 1 is switched, the monitor and the PC 2 are connected, and the screen of the PC 2 is displayed.

PC switchers are sometimes called KVM switchers and KVM switches.It has been released from multiple companies that sell peripheral devices.

ELECOM -PC switcher

Sanwa Supply -PC switching device (KVM)

There are various products in the switchers, each with different functions and features.I would like to briefly introduce some of the things that are there.

There are multiple peripheral devices that can be connected to the switching machine, and some that do not have one connection standard such as the USB and HDMI inserts, and some can switch multiple monitors and keyboards, mice, etc. at once.Therefore, it is recommended that you purchase it based on the peripheral devices and the number you are currently using.

Products with remote controls can be switched even if the switching machine is hidden in the back, so it is very convenient and recommended because it can be kept concerned about the interior of the room or switching to a switching machine.

When using a switching machine, there is a need for a little trouble with a power supply, so if there is no outlet, it may be a little troublesome.

It looks similar and has a distributor.Please note that this is the same signal from the computer output to multiple devices, so you cannot switch between two personal computers.

When using a switching machine on a work and a private computer, be careful with security and avoid connecting storage media.

Wireless connection case

Next is the introduction of wireless.Wireless is a wireless connection without a cable.I think Bluetooth is the main standard for wireless connection.The equipment that supports Bluetooth is very useful that can be placed in any place without being caught by the code, such as earphones, speakers, keyboards, and mouse.

To connect a Bluetooth device, you need a pairing.Pairing is a pairing information of each other for Bluetooth devices.Once paired, you no longer need pairing until the pairing information disappears.Once the pairing is completed, you can connect the Bluetooth device.Even if it is disconnected, the pairing information does not disappear and can be connected again without pairing.

There are also pairing features such as multi -pairing and multi -points.These are useful functions for switching between multiple PCs and smartphones and peripheral devices.

Multi -pairing is a function that allows you to register a single slave unit in multiple master units and record the settings when using a personal computer or smartphone as a master unit and a mouse, a keyboard, etc., which are the peripheral devices, etc. as a slave unit.I say.Using this function will reduce the hassle of changing the connection between the work PC and the private computer.

The multi -point can be registered as a multi -pairing, as well as a single slave unit, but can also automatically switch connections from multiple master units seamlessly.Suppose you want to watch the video with the other parent unit while listening to music with one of the main units, with earphones as an example.

Therefore, it is a useful function that the sound of the video flows from the earphones when the video is opened with the main unit and watching it.Because it is Bluetooth, it can be used not only on a personal computer but also on smartphones, so it is a recommended function for those who do not use a personal computer for private use.However, you can only hear one of the sounds because you are just switching the connection.

Introducing how to switch products with multi -pairing functions.This time, we will use two Windows 10 PCs, assuming that the headphones connected to the other are switched to the other PC.

1.First, disconnect the connected PC connection.

2.Settings> Device> Select the device to switch from Bluetooth and other devices, click and click to disconnect.

3.Next, connect on the PC on the side you want to connect.

4.Click here for setting> Device> Bluetooth and other devices click on the device you want to connect and click the connection.

The switching is now complete.Note that the method of connection and cutting varies depending on the thing.

Some Bluetooth products have a unique switching function.Since the functions differ between multi -pairing products and multi -point products, I would like to introduce some unique functions and characteristics separately.

Since the multi -pairing itself is only registered, it is necessary to operate on the main unit side when switching the connection, but some things have buttons for switching to the peripheral device, and the screen on the mouse.There is something that can be switched to another PC by bringing the cursor to the end, so you can easily switch.It is recommended to use this function, as it can reduce the trouble of changing the connection between the work PC and the private computer.

Due to the function of the multi -point, there are not so many corresponding products that the earphones, headphones, etc. are compatible with multi -points, but no different functions have been found depending on the product.However, since the function of the multi -point itself is convenient, we recommend the corresponding earphones and headphones.

Bluetooth requires a Bluetooth function for both peripheral devices and personal computers.PCs without Bluetooth function must purchase and connect a USB device or extension board called Bluetooth adapter.

in conclusion

This time, I introduced how to switch peripheral devices on a personal computer.Multi -pairing, multi -point compatible devices and switchers have many products, and each has its own functions.I recommend it.Use the switching function to reduce peripheral devices, place your favorite interior, and live a comfortable PC life.

Finally, we introduce other useful tools and information for teleworking.

An important friendly headset in the telework era!Why choose?What are the selection points and type differences?New clothes in a new way of working?For men who are worried about choosing clothes by telework.What kind of "work clothes" options?