Can the iPhone 13 series use an iPhone 12 case? Verification for all models

The appearance of the iPhone 13 series looks exactly like the iPhone 12, but can the 12 cases be diverted to 13 as it is?The US 9TO5MAC verifies from the dimensions of the main unit for each of the four models.

Both of the predecessor iPhone 12 series and iPhone 13 series are the same for both the edges of the main body and the edge edge (the display extends to the left and right edges).However, all models are small but cannot be ignored, so it seems that it is difficult to divert the case.

iPhone 12/12PRO and iPhone 13

The dimensions of iPhone 13 Pro and iPhone 13 are the same.In other words, the height is 146.7mm, the width is 71.5mm, and the thickness is 7.65mm.

The dimensions of the kata and the iPhone 12 and the iPhone 12 Pro are 146.7 mm, the width of 71.5 mm, and the thickness of 7.4 mm.

In other words, the dimensions of the iPhone 12/Pro and iPhone 13/Pro are almost the same, but the design around the back camera has been changed, so the latest model is about 0.25mm thicker than the previous year.As a result, the case for the iPhone 12/Pro cannot be attached to the iPhone 13/Pro.

For iPhone 12 mini and iPhone 13 mini

This is also the same as the height of the iPhone 12 mini and the iPhone 13 mini, and the width is 71.5mm.However, the thickness of the iPhone 12 mini is 7.4 mm, and the iPhone 13 mini has increased to 7.65mm due to the design change of the back camera.In other words, the case designed for the iPhone 12 mini does not fit the iPhone 13 mini.

For iPhone 12 Pro Max and iPhone 13 Pro Max

Finally, is it possible to use the last model case for the latest model for the maximum model of 6.7 inches?It is verification.This is also 160.8mm high for both iPhone 12 Pro Max and iPhone 13 Pro Max, and 78.1mm width.However, the former thickness is 7.4 mm, and the latter is as thick as 7.65mm due to the design change of the back camera, so it is unlikely to be diverted.

The 9TO5MAC also pointed out that both models had slightly shifted buttons between the previous year and this year.If the thickness is only 0.25mm, it may be "hard to fit in the case", but it seems that "the case hole and the button position are different".

The case for the iPhone 13 series has already been released in various third -party products in addition to Apple genuine.Entered Japanese version of the article, so I would be grateful if you could refer to that.

Source: 9to5mac